Question
Issue: How to fix This device can perform faster message on Windows?
Hi, every time I put a USB stick into the USB slot, I receive a popup message “This device can perform faster” message at the bottom right corner of my screen. I have no clue why is it showing up – am I doing something wrong? Would be nice to get some solutions for this.
Solved Answer
This device can perform faster message usually shows up on Windows when an external storage unit, such as an external hard drive, camera, phone, or any other device that can be connected via the USB slot, is inserted. In essence, this is not an error message but rather an indication that things can be drastically improved for the consumer.
Unlike errors like USB Device not recognized, This device can perform faster is not a critical error and will not impact your Windows 10 capabilities in any negative ways. In other words, it will not impair your operating system. Nevertheless, many users are unaware of why this message shows up or how to fix it in the first place.
As soon as they connect the camera or another external device via the USB slot, they are presented with the following message:
This device can perform faster
This USB device can perform faster if you connect it to a Hi-Speed USB 2.0 port.
For list of available ports, click here.
The discrepancies that causes the This device can perform faster popup to show up can be many. One of the main reasons is that USB 3.0-capable device is running at 2.0 speed only. This can also be caused by outdated or missing USB drivers, as well as incorrect driver settings.
Regardless of the reason, you should check the list of solutions below to fix This device can perform faster error for good. Before you start, we highly advise you running a scan with FortectMac Washing Machine X9 repair software, which could diagnose and repair various underlying Windows issues (missing DLLs, registry issues, BSODs,[1] etc.) for your you automatically.
Solution 1. Enable USB 3.0 eXtensible Host Controller Driver
In some cases, the USB 3.0 Host controller driver might be disabled. Here's how to enable it:
- Right-click on Start and pick Device Manager
- Here, expand the Universal Serial Bus controllers section
- Right-click on USB 3.0 eXtensible Host Controller and select Enable (note that this option will only work if the driver was disabled in the first place).
Solution 2. Update your USB drivers
- Open Device Manager as explained above
- Expand the Universal Serial Bus controllers section once again
- Right-click on each of the drivers available there and select Update driver
- Select Search automatically for drivers and wait
- Reboot when done.
If no drivers are available via using this method, it does not mean that they do not exist. Device Manager is known for not being able to identify the missing drivers or locating the newest versions available. Therefore, you should either download the latest drivers from manufacturer's website (which can take a long time, as you also need to determine the precise driver version and your device type) or use automatic driver updater such as DriverFix, which would do the job for you automatically within just a few minutes.
Solution 3. Connect your laptop to a power socket
In some cases, This device can perform faster error might show up due to power settings on laptops. Therefore, if the machine you are getting the message on is a laptop that is running on battery power, you should plug it into the electric socket to ensure that the USB port is running at its full capacity.
Solution 4. Use different connection ports
USB 2.0 is an older version of a connection type used to transfer data. If you look at your computer, you might see several different USB ports available – some are at the front while others are at the back. USB 3.0 is a faster connection type which is marked with a blue Standard-A receptacle.
Thus, if the transmission speeds suffer, you might be using a 2.0 USB version instead of 3.0, so go ahead and try different connection ports.
Solution 5. Disable USB Root power saving mode via Device Manager
- Open Device Manager and go to USB section once again
- Right-click on USB Root Hub and select Properties
- Go to Power Management tab
- Here, untick the Allow the computer to turn off this device to save power.
Solution 6. Enable xHCI controller in BIOS
xHCI[2] is an option in BIOS[3] that allows the USB 3.0 functionality, hence it must be enabled.
- To access BIOS, reboot your machine and continually press F2, F8, F10, Del, or another button on your keyboard (refer your motherboard or laptop manufacturer for details)
- In BIOS, you need to look for the xHCI option, which can be located in Advanced, Devices, Peripherals, or similar sections
- Once found, enable the feature and reboot your PC into normal mode.
Optimize your system and make it work more efficiently
Optimize your system now! If you don't want to inspect your computer manually and struggle with trying to find issues that are slowing it down, you can use optimization software listed below. All these solutions have been tested by ugetfix.com team to be sure that they help improve the system. To optimize your computer with only one click, select one of these tools:
Access geo-restricted video content with a VPN
Private Internet Access is a VPN that can prevent your Internet Service Provider, the government, and third-parties from tracking your online and allow you to stay completely anonymous. The software provides dedicated servers for torrenting and streaming, ensuring optimal performance and not slowing you down. You can also bypass geo-restrictions and view such services as Netflix, BBC, Disney+, and other popular streaming services without limitations, regardless of where you are.
Don’t pay ransomware authors – use alternative data recovery options
Malware attacks, particularly ransomware, are by far the biggest danger to your pictures, videos, work, or school files. Since cybercriminals use a robust encryption algorithm to lock data, it can no longer be used until a ransom in bitcoin is paid. Instead of paying hackers, you should first try to use alternative recovery methods that could help you to retrieve at least some portion of the lost data. Otherwise, you could also lose your money, along with the files. One of the best tools that could restore at least some of the encrypted files – Data Recovery Pro.
Jake Doe is the news editor at UGetFix. Since he met Ugnius Kiguolis in 2003, they both launched several projects that spread awareness about cybercrimes, malware, and other computer-related problems.
- ^ Chris Hoffman. Everything You Need To Know About the Blue Screen of Death. How-to Geek. Site that explains technology.
- ^ Extensible Host Controller Interface. Wikipedia. The free encyclopedia.
- ^ BIOS. Computer Hope. Free computer help since 1998.
